With ACH Solution, ENGEL presents a holistic production solution for high-quality 2C respirators with silicone sealing lip and replaceable filter on two injection moulding machines.
As universal fasteners, we encounter cable ties in all areas of life – even in medical technology. Samaplast produces similar connecting elements for closing the sternum after open heart surgery on ENGEL's tie-bar-less injection moulding machines in the clean room.
A. & J. Stöckli AG produces high-quality injection molded components, among others for household items. To create design panels for an oven, the Swiss company relied entirely on KraussMaffei's system competence to implement IMD (In-Mold Decoration) technology.
The heating system is a frequent cause of failure of a temperature control unit. We have changed that! With our heating system without direct contact with the heat transfer medium. A system without tank, which requires much less energy and one that will give you a lifetime warranty on top.
Even highly accurate probes and sensors have their tolerances. For example, up to 6 °C of the process temperature often remain undetected when a temperature control unit is replaced. With our device calibration ex works, we ensure reliable and reproducible temperature control.
With the Eco-pump from HB-Therm you can really save money and are also highly flexible when tempering molds. Eco-pump automatically regulates the speed without endangering the process. The energy savings can be recorded and shown on the display.
For the market launch of its new micro-injection unit for liquid silicone rubber at ENGEL live e-xperience from 13th to 16th October 2020, ENGEL is producing the smallest precision components for the field of ophthalmology with an individual part weight of 0.0013 grams.
The digital, Industry 4.0-compatible ultrasonic generator AGM Pro is designed for installation in automation lines and special machines. When developing the new AGM Pro, we focused particularly on ensuring simple integration and easy operation.
Sometimes, more is less. With the aim of further reducing cycle time, ENGEL has split the process of producing housing parts for medical devices using two-component injection moulding. The process was cut down to a very short cycle time under realistic production conditions at ENGEL’s stand at the K
The new SOMOS® CONRADT conveyor system is smaller and lighter than previously known systems. It has a modular design, consisting of a few components that can be assembled within a concise time. Its functionality is based on the Venturi principle.
Event Thursday, May 19, 2022 | 2:00 PM - 3:00 PM
Event Thursday, November 26, 2020 | 9:00 AM - 11:00 AM
How does powder injection molding work and what potential does this innovative and economical process offer for the production of ceramic and metal components? Find out on 26 November at the free ARBURG webinar on the subject of "Introduction to powder injection moulding".
Event Tuesday, October 13, 2020 - Friday, October 16, 2020
True passion, real innovation, virtual experience – this is the message from ENGEL at the first virtual and interactive trade fair "ENGEL live e-xperience" from 13 to 16 October 2020.
Event Tuesday, January 21, 2020 - Thursday, January 23, 2020
HATAG AG is celebrating its 50th anniversary and has several highlights ready for you: Visit us at stand A 1004 in H 1, get to know our new products and learn more about a new partnership with a leading supplier in temperature control technology: Single Holding GmbH.
Experience the ENGEL medical focus live at the Swiss Plastics Expo, where high-performance and extreme precision are required. .
Event Tuesday, October 16, 2018 - Saturday, October 20, 2018
The right peripheral and automation solution is crucial for efficient and successful plastics processing. Discuss with HATAG's specialists at Fakuma what contribution peripherals can make to your production.
ARBURG is one of the world’s leading manufacturers of plastic processing machines. The portfolio includes ALLROUNDER injection moulding machines with clamping forces between 125 and 6,500 kN, freeformers for industrial additive manufacturing, robotic systems, turnkey solutions and further peripheral
Münsingen, Switzerland
With nine production plants in Europe, North America and Asia, as well as subsidiaries and representatives in more than 85 countries, ENGEL has a global presence. From its foundation in 1945 to the present day, ENGEL has always been 100 percent family-owned.
Frauenfeld, Switzerland
HATAG is your specialist with over 50 years of experience for peripheral equipment, complete plants (e.g. conveying, drying, refrigeration plants), plant interlinking by means of automation and surface finishing. As a pioneering value-added partner, we offer you tailor-made à la carte solutions.
Bolligen, Switzerland
As a world leading manufacturer of temperature control equipment, HB-Therm AG has developed and produced innovative temperature control technology that meet the highest quality standards since 1967. With comprehensive expertise and a motivated workforce, the company has gained recognition as a techn
St. Gallen, Switzerland
Your specialist in the fields of peripherals, planning, and execution of plants for the plastics, food, chemical and related industries.
Rotkreuz, Switzerland
Rotkreuz , Switzerland
Your satisfaction is our motivation. MAPAG Maschinen AG is representing Sumitomo (SHI) Demag in the injection moulding sector for over 20 years and ILLIG in the thermoforming sector for over 50 years.
Bern, Switzerland
Oftringen, Switzerland
The traditional Swiss company NETSTAL stands internationally for leading high-performance injection molding machines and system solutions.
Näfels, Switzerland