Intelligent manufacturing of complex components

Intelligent manufacturing begins with component design, which nowadays encompasses a wide range of functions, from surface coatings through to electronics. The goal is to manufacture these complex components in integrated process steps using clever tool concepts and automated assembly steps.

1230 Following Show all

Posts - that's to be discovered on the topic (11)

Story

From discussion at a trade fair to company merger

As the crow flies, the distance between the two companies Torson Kunststofftechnik AG and Injex AG in Zurich was barely 350 m. But they only became acquainted at the 2020 Swiss Plastics Expo in Lucerne. Today, these two companies are working towards a common cause – as Torson Injex AG.

Service

Combined metal turning and plastic parts

With our injection molding machines with clamping forces of 15-250 tons, we provide you with competent support in injection molding. With a high level of expertise in various disciplines, our strengths lie primarily in hybrid parts and assemblies. You benefit from short distances and clear implement

Showcase

SFS successfully relies on NETSTAL for medical precision injection molding

Since 2004, SFS uses two-component injection molding machines from NETSTAL for the complex production of dental, latex-free dental products. In the course of the latest capacity expansion, 4 ELION 4200 2C machines were equipped with the SMART OPERATION control option.

Product

HEXACUT® - End mill

Through close cooperation with end users in the CFRP industry, we were able to develop a new cutter geometry based on the HEXACUT® CFRP cutter geometry. The new DIP®6p diamond coating enables maximum tool life - even with challenging materials.

Product

High-precision ultrasonic welding

The Electrical Motion 35 with electric drive works with the highest precision. It is ideally suited for ultrasonic welding and ultrasonic punching of small to medium-sized plastic parts.

Showcase

ENGEL in medical technology: the e-motion 220 impresses

The Schott Group produces prefillable syringes made of COC (cyclo olefin copolymer) on an ENGEL e-motion 220 for the Pharmaceutical Systems business unit at the St. Gallen Competence Center. These syringes require maximum precision, cleanliness and performance in production.

Service

Research and development in injection moulding / PUR

The IWK is the research and development partner for companies in injection moulding and PUR. The Institute can develop fundamental solutions for problems of practical relevance.

Product

ILLIG thermoforming machine RD74d

ILLIG has developed a brandnew thermoformer, which can be operated with up to 3 bar compressed air and with inexpensive tools. Further, quick and easy tool changes minimize downtimes. MAPAG Maschinen AG is your contact in Switzerland and Lichtenstein for this machine.

Showcase

Sturdy material for skin contakt

The KITRIS data tracker for tennis players places high demands on the materials used: contact with the skin, sunscreen, sweat, body lotion or anti-mosquito spray. Find out why Mythentec was the right partner to realize this innovative product.

Product

Automation

Automation is becoming ever more important as a decisive success factor in production. Today, a high degree of reproducibility when inserting components, demolding finished components and linking successive production processes by way of automation are essential elements.

Events (2)

Event

Jan 21, 2020 12:05 PM - 12:25 PM

Funktions- & Prozessintegration beim Spritzgiessen - SPE 20

Event

Jan 21, 2020 - Jan 23, 2020

Intelligent manufacturing of complex components

Providers (10)

KraussMaffei (Schweiz) AG

Die Produktmarke KraussMaffei steht international für wegweisende und technologieübergreifende System- und Verfahrenslösungen in der Spritzgieß, Reaktions- und Extrusionstechnik sowie der Automation.

Rotkreuz , Switzerland

Mythentec AG

Mythentec provides a wide range of services for your projects with a corresponding depth of dedication. Our team is committed to delivering a maximum degree offl exibility and ensuring that communication channels remain uncomplicated and short.

Biberist, Switzerland

MAPAG Maschinen AG

Your satisfaction is our motivation. MAPAG Maschinen AG is representing Sumitomo (SHI) Demag in the injection moulding sector for over 20 years and ILLIG in the thermoforming sector for over 50 years.

Bern, Switzerland

ENGEL

With nine production plants in Europe, North America and Asia, as well as subsidiaries and representatives in more than 85 countries, ENGEL has a global presence. From its foundation in 1945 to the present day, ENGEL has always been 100 percent family-owned.

Frauenfeld, Switzerland

RINCO ULTRASONICS AG

RINCO ULTRASONICS is a leading company in the field of ultrasonic welding and cutting technology. With over 130 employees, a presence in more than 40 countries and decades of experience under our belt, we are the strong partner for projects on all scales.

Romanshorn, Switzerland

Swiss Plastics Expo

The Swiss Plastics Expo is the meeting place for everyone who works with plastics. Thanks to a unique combination of trade fair, symposium and networking, the plastics fair offers an overview of integral solutions for sustainable and efficient production in line with the highest standards.

Luzern, Switzerland

Hufschmied Zerspanungssysteme GmbH

Hufschmied - Europe´s leading manufacturer for material-related tools

Bobingen, Germany

NETSTAL Maschinen AG

The traditional Swiss company NETSTAL stands internationally for leading high-performance injection molding machines and system solutions.

Näfels, Switzerland

IWK Institut für Werkstofftechnik und Kunststoffverarbeitung

IWK - the combination of science and practice for innovative solutions with modern materials, production processes and multi-material technology

Rapperswil-Jona, Switzerland